First commit
This commit is contained in:
377
syno/smart.sh
Executable file
377
syno/smart.sh
Executable file
@@ -0,0 +1,377 @@
|
||||
#!/bin/bash
|
||||
|
||||
# http://fr.wikipedia.org/wiki/Self-Monitoring,_Analysis_and_Reporting_Technology
|
||||
|
||||
#Attributes names (this is deduced from ID by smartctl and may be incorrect, as it's highly vendor-specific)
|
||||
#Flag values: if given in POSRCK+ format, the presence of each letter indicates that the flag is on.
|
||||
#P: pre-failure warning ; O: updated continuously ; S: speed / performance attribute ; R: error rate ; C: event count K: auto-keep ; +: undocumented bits present
|
||||
#Updated: the attribute is usually updated continuously, or during Offline Data Collection only.
|
||||
#Type: alarm condition is reached when if normalized value becomes less than or equal to threshold. Type indicates whether it's a signal of drive's pre-failure time or just an old age.
|
||||
#Raw value: as reported by drive. May or may not be sensible.
|
||||
#Threshold for normalized value. Normalized value should be greater than threshold
|
||||
#Worst normalized value recorded for this attribute during the drive's lifetime(with SMART enabled)
|
||||
#Normalized value (highly vendor-specific; converted from Raw value by the drive's firmware)
|
||||
#Failed when the normalized value became equal or less than threshold
|
||||
|
||||
bold='[1m'
|
||||
nobold='[22m'
|
||||
bgblue='[44m'
|
||||
bgnormal='[49m'
|
||||
italic='[3m'
|
||||
noitalic='[23m'
|
||||
under='[4m'
|
||||
nounder='[24m'
|
||||
|
||||
#modelName=$(echo "$synoSystem" | grep $OID_modelName | cut -d "=" -f2)
|
||||
|
||||
# -P showall
|
||||
#smart2=$(ssh root@192.168.0.8 "smartctl -a /dev/hda -d ata")
|
||||
#Temp=$(echo "$smart2" | egrep "Model|Temp")
|
||||
#echo "$Temp"
|
||||
|
||||
|
||||
|
||||
#WORST (le pire)
|
||||
#THRESH (battre) threshold (seuil)
|
||||
|
||||
|
||||
#smart3=$(ssh root@192.168.0.8 "find /dev/hd[a-d] -exec /usr/syno/bin/smartctl -iA -d ata {} \;")
|
||||
#Serial=$(echo "$smart3" | egrep "Serial")
|
||||
#echo "$Serial"
|
||||
|
||||
# fdisk -l ; df -h
|
||||
# pour les pérfis ide: /dev/hd*
|
||||
# pour les périferiques sata et usb: /dev/sd*
|
||||
# fdisk -l | grep "^/dev/"
|
||||
# df -h | grep "USB"
|
||||
|
||||
#sdq: Toshiba 750 Go (volumeUSB2)
|
||||
#/usr/syno/bin/smartctl -aH -d sat /dev/sdq => OK
|
||||
|
||||
#sdr: Toshiba 2 To (volumeUSB1)
|
||||
#/usr/syno/bin/smartctl -aH -d sat /dev/sdr => OK **
|
||||
|
||||
# -d TYPE, --device=TYPE
|
||||
# Specify device type to one of: ata, scsi, sat[,auto][,N][+TYPE], usbcypress[,X], usbjmicron[,p][,x][,N], usbsunplus, marvell, areca,N/E, 3ware,N, hpt,L/M/N, megaraid,N, cciss,N, auto, test
|
||||
|
||||
model=""
|
||||
serial=""
|
||||
firmware=""
|
||||
capacity=""
|
||||
temperature=""
|
||||
health=""
|
||||
smart1=""
|
||||
smart1v=""
|
||||
smart1t=""
|
||||
smart1w=""
|
||||
smart2=""
|
||||
smart2v=""
|
||||
smart2t=""
|
||||
smart2w=""
|
||||
smart3=""
|
||||
smart3v=""
|
||||
smart3t=""
|
||||
smart3w=""
|
||||
smart4=""
|
||||
smart4v=""
|
||||
smart4t=""
|
||||
smart4w=""
|
||||
smart5=""
|
||||
smart5v=""
|
||||
smart5t=""
|
||||
smart6w=""
|
||||
smart6=""
|
||||
smart6v=""
|
||||
smart6t=""
|
||||
smart6w=""
|
||||
smart7=""
|
||||
smart7v=""
|
||||
smart7t=""
|
||||
smart7w=""
|
||||
smart8=""
|
||||
smart8v=""
|
||||
smart8t=""
|
||||
smart8w=""
|
||||
smart9=""
|
||||
smart9v=""
|
||||
smart9t=""
|
||||
smart9w=""
|
||||
smart10=""
|
||||
smart10v=""
|
||||
smart10t=""
|
||||
smart10w=""
|
||||
smart11=""
|
||||
smart11v=""
|
||||
smart11t=""
|
||||
smart11w=""
|
||||
smart12=""
|
||||
smart12v=""
|
||||
smart12t=""
|
||||
smart12w=""
|
||||
smart13=""
|
||||
smart13v=""
|
||||
smart13t=""
|
||||
smart13w=""
|
||||
smart14=""
|
||||
smart14v=""
|
||||
smart14t=""
|
||||
smart14w=""
|
||||
smart15=""
|
||||
smart15v=""
|
||||
smart15t=""
|
||||
smart15w=""
|
||||
|
||||
i=0
|
||||
j=0
|
||||
|
||||
declare RESULT=()
|
||||
while read -r LINE; do
|
||||
RESULT[${#RESULT[@]}]=$LINE
|
||||
#echo $LINE
|
||||
|
||||
_model=$(echo $LINE | grep "Device Model"| cut -d ":" -f2)
|
||||
if [ -n "$_model" ] ; then model[$i]=$_model ; fi
|
||||
|
||||
_serial=$(echo $LINE | grep "Serial Number"| cut -d ":" -f2)
|
||||
if [ -n "$_serial" ] ; then serial[$i]=$_serial ; fi
|
||||
|
||||
_firmware=$(echo $LINE | grep "Firmware Version"| cut -d ":" -f2)
|
||||
if [ -n "$_firmware" ] ; then firmware[$i]=$_firmware ; fi
|
||||
|
||||
# recherche chaine entre [] sed 's/.*\[//;s/\].*//'
|
||||
_capacity=$(echo $LINE | grep "User Capacity"| cut -d ":" -f2 | sed 's/.*\[//;s/\].*//')
|
||||
if [ -n "$_capacity" ] ; then capacity[$i]=$_capacity ; fi
|
||||
|
||||
_temperature=$(echo $LINE | grep "Temperature_Celsius"| cut -d " " -f10)
|
||||
if [ -n "$_temperature" ] ; then temperature[$i]=$_temperature ; fi
|
||||
|
||||
_health=$(echo $LINE | grep "SMART overall-health"| cut -d ":" -f2 | sed 's/^ *//g')
|
||||
if [ -n "$_health" ] ; then health[$i]=$_health ; fi
|
||||
|
||||
## SMART
|
||||
|
||||
_smart1=$(echo $LINE | grep "Raw_Read_Error_Rate") #1
|
||||
if [ -n "$_smart1" ]
|
||||
then
|
||||
# VALUE WORST THRESH (valeur mini failed)
|
||||
echo $_smart1
|
||||
smart1[$i]=$(echo $_smart1 | awk '{print $10}')
|
||||
smart1v[$i]=$(echo $_smart1 | awk '{print $4}')
|
||||
smart1w[$i]=$(echo $_smart1 | awk '{print $5}')
|
||||
smart1t[$i]=$(echo $_smart1 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart2=$(echo $LINE | grep "Reallocated_Sector_Ct") #5
|
||||
if [ -n "$_smart2" ]
|
||||
then
|
||||
smart2[$i]=$(echo $_smart2 | awk '{print $10}')
|
||||
smart2v[$i]=$(echo $_smart2 | awk '{print $4}')
|
||||
smart2w[$i]=$(echo $_smart2 | awk '{print $5}')
|
||||
smart2t[$i]=$(echo $_smart2 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart3=$(echo $LINE | grep "Spin_Retry_Count") #10
|
||||
if [ -n "$_smart3" ]
|
||||
then
|
||||
smart3[$i]=$(echo $_smart3 | awk '{print $10}')
|
||||
smart3v[$i]=$(echo $_smart3 | awk '{print $4}')
|
||||
smart3w[$i]=$(echo $_smart3 | awk '{print $5}')
|
||||
smart3t[$i]=$(echo $_smart3 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart4=$(echo $LINE | grep "Command_Timeout") #188
|
||||
if [ -n "$_smart4" ]
|
||||
then
|
||||
smart4[$i]=$(echo $_smart4 | awk '{print $10}')
|
||||
smart4v[$i]=$(echo $_smart4 | awk '{print $4}')
|
||||
smart4w[$i]=$(echo $_smart4 | awk '{print $5}')
|
||||
smart4t[$i]=$(echo $_smart4 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart5=$(echo $LINE | grep "Airflow_Temperature_Cel") #190
|
||||
if [ -n "$_smart5" ]
|
||||
then
|
||||
smart5[$i]=$(echo $_smart5 | awk '{print $10}')
|
||||
smart5v[$i]=$(echo $_smart5 | awk '{print $4}')
|
||||
smart5w[$i]=$(echo $_smart5 | awk '{print $5}')
|
||||
smart5t[$i]=$(echo $_smart5 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart6=$(echo $LINE | grep "Reallocated_Event_Count") #196
|
||||
if [ -n "$_smart6" ]
|
||||
then
|
||||
smart6[$i]=$(echo $_smart6 | awk '{print $10}')
|
||||
smart6v[$i]=$(echo $_smart6 | awk '{print $4}')
|
||||
smart6w[$i]=$(echo $_smart6 | awk '{print $5}')
|
||||
smart6t[$i]=$(echo $_smart6 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart7=$(echo $LINE | grep "Current_Pending_Sector") #197
|
||||
if [ -n "$_smart7" ]
|
||||
then
|
||||
smart7[$i]=$(echo $_smart7 | awk '{print $10}')
|
||||
smart7v[$i]=$(echo $_smart7 | awk '{print $4}')
|
||||
smart7w[$i]=$(echo $_smart7 | awk '{print $5}')
|
||||
smart7t[$i]=$(echo $_smart7 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart8=$(echo $LINE | grep "Offline_Uncorrectable") #198
|
||||
if [ -n "$_smart8" ]
|
||||
then
|
||||
smart8[$i]=$(echo $_smart8 | awk '{print $10}')
|
||||
smart8v[$i]=$(echo $_smart8 | awk '{print $4}')
|
||||
smart8w[$i]=$(echo $_smart8 | awk '{print $5}')
|
||||
smart8t[$i]=$(echo $_smart8 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart9=$(echo $LINE | grep "Soft_Read_Error_Rate") #201
|
||||
if [ -n "$_smart9" ]
|
||||
then
|
||||
smart9[$i]=$(echo $_smart9 | awk '{print $10}')
|
||||
smart9v[$i]=$(echo $_smart9 | awk '{print $4}')
|
||||
smart9w[$i]=$(echo $_smart9 | awk '{print $5}')
|
||||
smart9t[$i]=$(echo $_smart9 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart10=$(echo $LINE | grep "Disk_Shift") #220
|
||||
if [ -n "$_smart10" ]
|
||||
then
|
||||
smart10[$i]=$(echo $_smart10 | awk '{print $10}')
|
||||
smart10v[$i]=$(echo $_smart10 | awk '{print $4}')
|
||||
smart10w[$i]=$(echo $_smart10 | awk '{print $5}')
|
||||
smart10t[$i]=$(echo $_smart10 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
## INFOS
|
||||
|
||||
_smart11=$(echo $LINE | grep "Start_Stop_Count") #4
|
||||
if [ -n "$_smart11" ]
|
||||
then
|
||||
smart11[$i]=$(echo $_smart11 | awk '{print $10}')
|
||||
smart11v[$i]=$(echo $_smart11 | awk '{print $4}')
|
||||
smart11w[$i]=$(echo $_smart11 | awk '{print $5}')
|
||||
smart11t[$i]=$(echo $_smart11 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart12=$(echo $LINE | grep "Seek_Error_Rate") #7
|
||||
if [ -n "$_smart12" ]
|
||||
then
|
||||
smart12[$i]=$(echo $_smart12 | awk '{print $10}')
|
||||
smart12v[$i]=$(echo $_smart12 | awk '{print $4}')
|
||||
smart12w[$i]=$(echo $_smart12 | awk '{print $5}')
|
||||
smart12t[$i]=$(echo $_smart12 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart13=$(echo $LINE | grep "Power_On_Hours") #9
|
||||
if [ -n "$_smart13" ]
|
||||
then
|
||||
smart13[$i]=$(echo $_smart13 | awk '{print $10}')
|
||||
smart13v[$i]=$(echo $_smart13 | awk '{print $4}')
|
||||
smart13w[$i]=$(echo $_smart13 | awk '{print $5}')
|
||||
smart13t[$i]=$(echo $_smart13 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart14=$(echo $LINE | grep "Power_Cycle_Count") #12
|
||||
if [ -n "$_smart14" ]
|
||||
then
|
||||
smart14[$i]=$(echo $_smart14 | awk '{print $10}')
|
||||
smart14v[$i]=$(echo $_smart14 | awk '{print $4}')
|
||||
smart14w[$i]=$(echo $_smart14 | awk '{print $5}')
|
||||
smart14t[$i]=$(echo $_smart14 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
_smart15=$(echo $LINE | grep "UDMA_CRC_Error_Count") #199
|
||||
if [ -n "$_smart15" ]
|
||||
then
|
||||
smart15[$i]=$(echo $_smart15 | awk '{print $10}')
|
||||
smart15v[$i]=$(echo $_smart15 | awk '{print $4}')
|
||||
smart15w[$i]=$(echo $_smart15 | awk '{print $5}')
|
||||
smart15t[$i]=$(echo $_smart15 | awk '{print $6}')
|
||||
fi
|
||||
|
||||
|
||||
if [ -n "$(echo $LINE | grep "Copyright")" ] ; then ((i=i+1)) ; fi
|
||||
#echo $i
|
||||
|
||||
done < <(ssh root@192.168.0.8 "find /dev/sd[a-d,q-r] -exec /usr/syno/bin/smartctl -a -v 9,minutes -d sat {} \;")
|
||||
#done < <(find /dev/disk0 -exec smartctl -a -v 9,minutes -d sat {} \;)
|
||||
|
||||
|
||||
for((j=1;j<=$i;j++));
|
||||
do
|
||||
echo "${bold}Disk $j [${health[j]}]:${nobold}"
|
||||
echo " Modèle:${model[j]} N° serie:${serial[j]} Firmware:${firmware[j]} Capacité: ${capacity[j]}"
|
||||
echo " Temp: ${temperature[j]}°C"
|
||||
|
||||
echo " ${under}Alarmes:${nounder}"
|
||||
|
||||
a=${smart1[j]}
|
||||
#echo "Raw_Read_Error_Rate: $a"
|
||||
if [[ -n $a && $a -gt 0 ]]; then echo " Raw_Read_Error_Rate: $a" ; fi
|
||||
av=${smart1v[j]}
|
||||
at=${smart1t[j]}
|
||||
aw=${smart1w[j]}
|
||||
echo "value: $av tresh: $at worst: $aw"
|
||||
|
||||
b=${smart2[j]}
|
||||
#echo "Reallocated_Sector_Ct: $b"
|
||||
if [[ -n $b && $b -gt 0 ]]; then echo " Reallocated_Sector_Ct: $b" ; fi
|
||||
c=${smart3[j]}
|
||||
#echo "Spin_Retry_Count: $c"
|
||||
if [[ -n $c && $c -gt 0 ]]; then echo " Spin_Retry_Count: $c" ; fi
|
||||
d=${smart4[j]}
|
||||
#echo "Command_Timeout: $d"
|
||||
if [[ -n $d && $d -gt 0 ]]; then echo " Command_Timeout: $d" ; fi
|
||||
e=${smart5[j]}
|
||||
#echo "Airflow_Temperature_Cel: $e"
|
||||
if [[ -n $e && $e -gt 0 ]]; then echo " Airflow_Temperature_Cel: $e" ; fi
|
||||
f=${smart6[j]}
|
||||
#echo "Reallocated_Event_Count: $f"
|
||||
if [[ -n $f && $f -gt 0 ]]; then echo " Reallocated_Event_Count: $f" ; fi #
|
||||
g=${smart7[j]}
|
||||
#echo "Current_Pending_Sector: $g"
|
||||
if [[ -n $g && $g -gt 0 ]]; then echo " Current_Pending_Sector: $g" ; fi
|
||||
h=${smart8[j]}
|
||||
#echo "Offline_Uncorrectable: $h"
|
||||
if [[ -n $h && $h -gt 0 ]]; then echo " Offline_Uncorrectable: $h" ; fi
|
||||
k=${smart9[j]}
|
||||
#echo "Soft_Read_Error_Rate: $k"
|
||||
if [[ -n $k && $k -gt 0 ]]; then echo " Soft_Read_Error_Rate: $k" ; fi #
|
||||
l=${smart10[j]}
|
||||
#echo "Disk_Shift: $l"
|
||||
if [[ -n $l && $l -gt 0 ]]; then echo " Disk_Shift: $l" ; fi #
|
||||
|
||||
echo " ${under}Infos:${nounder}"
|
||||
m=${smart11[j]}
|
||||
#echo "Start_Stop_Count: $m"
|
||||
if [[ -n $m && $m -gt 0 ]]; then echo " Start_Stop_Count: $m" ; fi #
|
||||
n=${smart12[j]}
|
||||
#echo "Seek_Error_Rate: $n"
|
||||
if [[ -n $n && $n -gt 0 ]]; then echo " Seek_Error_Rate: $n" ; fi #
|
||||
o=${smart13[j]}
|
||||
#echo "Power_On_Hours: $o"
|
||||
if [[ -n $o && $o -gt 0 ]]; then echo " Power_On_Hours: $o" ; fi #
|
||||
p=${smart14[j]}
|
||||
#echo "Power_Cycle_Count: $p"
|
||||
if [[ -n $p && $p -gt 0 ]]; then echo " Power_Cycle_Count: $p" ; fi #
|
||||
q=${smart15[j]}
|
||||
#echo "UDMA_CRC_Error_Count: $q"
|
||||
if [[ -n $q && $q -gt 0 ]]; then echo " UDMA_CRC_Error_Count: $q" ; fi #
|
||||
done
|
||||
|
||||
#for hd in /dev/hda*; do
|
||||
#for hd in /dev/hd[a-z]; do
|
||||
#for hd in /dev/disk[1-9]; do
|
||||
#dd=$(ssh root@192.168.0.8 "for hd in /dev/hd[a-d]; do smartctl -A $hd -d ata; done")
|
||||
|
||||
#dd=$(ssh root@192.168.0.8 "for i in $(ls /dev/ | grep sd[a-d]\$) ; do /usr/syno/bin/smartctl -A /dev/$i -d ata; done")
|
||||
#dd=$(ssh root@192.168.0.8 "for i in $(ls /dev/ | grep sd[a-d]\$) ; do /usr/syno/bin/smartctl -A /dev/sda -d ata; done")
|
||||
#echo "$dd"
|
||||
|
||||
#VALUE="_AAAA"
|
||||
|
||||
#if [ ${VALUE: 1:3} = "AA" ]; then
|
||||
#echo "oui"
|
||||
#else
|
||||
#echo "non"
|
||||
#fi
|
||||
Reference in New Issue
Block a user